4.
Remove the base enclosure.
Reverse this procedure to install the base enclosure.
Display assembly
NOTE: The TouchScreen display assembly is spared only at the component level. The non-
TouchScreen display assembly is spared at both the component and the subcomponent level. For more
display assembly spare part information, see the individual removal subsections.
Description Spare part number
15.6-in, BrightView, FHD, LED, TouchScreen display assembly 720550-001
15.6-in, BrightView, HD, LED, TouchScreen display assembly 720549-001
15.6-in, BrightView, FHD, LED, non-TouchScreen display assembly 720552-001
15.6-in, BrightView, HD, LED, non-TouchScreen display assembly 720551-001
To remove the display assembly and access the display assembly subcomponents, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
Component replacement procedures
57
