11
Clear Vinyl Sheet
Considerations
•
••
•
Supported (
) print modes and resolutions:
Recommendations for best results
Preparation
•
••
•
Dust with a lint-free cloth to remove any dust and handle with gloves to avoid fingerprints on edge
of media
•
••
•
Use isopropyl alcohol to clean handling edges. Although not always visible, oils from fingers may
still mar surface for printing.
•
••
•
Media is prone to static so it may benefit from wiping with anti-static device prior to printing.
Printing
•
••
•
High Quality 600x600 mode is recommended, but depending on ink coverage and image content,
other supported modes may print acceptably.
•
••
•
Use low UV lamp setting.
•
••
•
Use the Media Wizard vacuum settings, increasing if necessary.
•
••
•
Use Polystyrene color profile, or Foamed PVC or a generic equivalent.
Output Handling
•
••
•
Adhesion may be poor on this media. Print in a higher quality mode, use a higher UV lamp power,
and/or wait 24 hours before trimming to improve adhesion.
•
••
•
Always use a sharp blade when cutting and be aware that some ink flaking will occur in high ink
load areas unless trimmed outside of the printed area.
1200x600 600x600 600x300
HQ Prod
BB HQ Prod
BB HQ Prod BB
