A SERVICE OF

logo

2. Lift the display assembly (2) straight up and remove it.
3. If it is necessary to replace the speakers, perform the following steps:
a. Squeeze the sides of the speaker grill together to release the pressure clips, and then remove
the speaker grill. The speaker grill is available using spare part number 506338-001.
b. Remove the two black Phillips PM2.0×8.0 screws (1) that secure the speaker assembly to the
display enclosure. All display assembly subcomponent screws (for 8.9-inch panels only) are
available in the Display Screw Kit, spare part number 509700-001.
50 Chapter 4 Removal and replacement procedures