A SERVICE OF

logo

7
2. Install the GBIC
a. Locate the short-wave GBIC (Gigabit Interface Converter) included in the FC I/O adapter kit.
b. Install the GBIC into the receptacle on the FC I/O adapter (see figure 2).
NOTE The GBIC can only be installed one way, because the GBIC and guide rails inside the FC I/O
adapter receptacle are keyed.
Figure 2. GBIC Module
Do not attach Fibre Channel cables to the FC I/O adapter at this time. Also, do not reboot the HP NetServers at this time.
To part 2 of the HP NetServer Installation Guide.
Installing the GBIC