14 GETTING TO KNOW THE M208: Overview of Print Server Installation
the name of one of the eight default destinations on the unit. (e.g. d1prn, d3com2,
etc.)
For more information on NetBIOS over TCP/IP configurations, please see CONFIG-
URING THE M208 FOR WINDOWS on page 79.
Basic AppleTalk Configuration
The following outlines the basic steps required to add a M208 to an AppleTalk net-
work.
An AppleTalk setup does not require any Print Server configuration; the network
parameters are automatically configured for you once the M208 is booted on the net-
work.
Once the unit is physically attached to the network, you need to:
1 Select Chooser from the Apple Menu.
2 Select the Laserwriter icon.
A list of available printers will appear. By default, the format of each name is
M208name_papname
where M208name is the name of the M208 and papname is
an M208 I/O port. Both names are configurable.
M_000BF5_prn
is the printer associated with the M208 named M_000BF5 using the parallel port.
3 From the list of printers, select one to print to.
For more information on AppleTalk configurations, please see CONFIGURING THE
M208 FOR APPLETALK on page 75.
Note
Example
