A SERVICE OF

logo

Removal and replacement procedures 38
d.
Remove four screws from the sides of the drive.
Reuse these screws when you install the new removable media drive.
e. Place the old media drive on a static-dissipating work surface or inside an anti-static bag.
f. Proceed to step 5.
CAUTION: Do not discard the EMI shield. If the drive is removed in the future, you must reinstall the
shield to maintain proper cooling.
4. Remove the EMI shield from the second removable media drive bay.
a. Insert a Phillips screwdriver to the marked openings () on the shield to dislodge it from the
chassis (
1).
b. Remove the EMI shield from the chassis (2)