A SERVICE OF

logo

Light status Light pattern State of the product Action
All lights are off
NOTE: The power button backlight
is on.
The formatter is not
connected to the
product correctly.
1. Turn off the
product.
2. Wait
30 seconds, and
then turn on the
product.
3. Wait for the
product to
initialize.
Contact HP customer
support. See
Customer support
on page 110.
Attention , ready , and go
lights cycle. Toner light is off.
NOTE: The power button backlight
is on.
The formatter is
initializing.
No action required.
Wait for the
initialization period to
end. The product
enters the Ready
state when the
initialization period is
finished.
All lights cycle.
NOTE: The power button backlight
is on.
The product is
processing a cleaning
page.
No action required.
Wait for the cleaning
process to end. The
product enters the
Ready state when the
cleaning process is
finished.
Ready light is on, and all other
lights are off.
NOTE: The power button backlight
is on.
The product is in the
Ready state.
No action required.
The product is ready
to receive a print job.
Table 8-2 Control-panel lights (continued)
ENWW Interpret control-panel light patterns 77