SUPPLIES REQUIRED
110g HP-P2035 toner for the CE505A cartridge (2,300 pages)
290g HP-P2035 toner for the CE505X cartridge (6,500 pages)
Replacement Chip
New Drum (Optional) Uninet #13372 - HP P 2035, 2055 Unidrum™ gearless recommended.
Wiper Blade (Optional)
Dr. Blade (Optional)
Magnetic roller (Optional)
Sealing Strip (Optional)
Cotton Swabs
Isopropyl Alcohol
Drum Padding Powder
REQUIRED SUPPLIES
Jeweler’s screwdriver
Phillips head screw driver
Small Common screw driver
X-Acto knife with square chisel type blade (# 17)
Flush Cutting wire cutters
Dremel type tool with side grinding bit
3/32 drill bit
Small #4 ¼” long self tapping screws
The pins in these cartridges are very similar to the HP-1160/1320 cartridges. The best way to remove them without damaging
the cartridge is to cut two small holes. Other than the location, basically the same procedure as the 1160/1320 is used.
HP P2035 • 2055 CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
1. Remove the drum cover by prying up on each end. Note the spring position so that it can be replaced later.