A SERVICE OF

logo

Removal and Replacement Procedures
Maintenance and Service Guide 5–31
3. Remove the seven PM2.0×8.0 screws 1 on the surface of the
base enclosure and the four PM2.0×8.0 screws 2 in the
battery bay.
Removing the Top Cover Screws, Part 1
4. Remove the two PM2.0×3.0 screws 1 in the optical drive bay
and the four PM2.0×3.0 screws 2 on the rear edge of the base
enclosure.
Removing the Top Cover Screws, Part 2