
2 Connecting to a Netware 4.11 Server
Windows for Workgroups Version 3.11
2 Connecting to a Netware 4.11 Server
Windows for
Workgroups
Version 3.11
Requirements
• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.
• Intel EtherExpress Pro 10+ ISA 10MBS Ethernet adapter card and drivers
disk.
• Vectra VL8 and VL7 Driver Name: EPRO.386 Size: 16K Date: 10/22/96
• Vectra VE7/VE8 Driver Name: EEPRODI.INS Size: 784B Date: 10/26/95
• Novell Netware 4.1 server that supports Net BEUI, NWLink IPX/SPX, and
NWLink NetBIOS transfer protocols.
• Netware Client for DOS and MS Windows
Device Configuration
• Board Connector type Auto-detect
• Force 8-bit operation Yes
• Flash chip address Disabled
• Remote boot program None
Procedure
1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10 ISA
Ethernet adapter card into an ISA slot.
2 Connect network cable media to the Intel EtherExpress card.
3 Power on the machine.
4 After booting, insert the Intel EtherExpress drivers disk Ver. 3.5”, and
execute “A:\SOFTSET2.EXE.”
5 Select “Change Adapter configuration” and verify the resource settings
Vectra VL8 Vectra VL7 Vectra VE7/VE8
I/O Address 210-21Fh 210-21Fh 300-30Fh
Interrupt 10 10 (16 bit only) 11 (16 bit only)