Display panel
Description Spare part number
HD+ WVA display panel 653271-001
FHD WVA display panel for use only with LTE module 653275-001
FHD WVA display panel 653273-001
NOTE: The display panel can be removed separately from the display assembly.
Before removing the display panel, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 48).
Remove the display panel:
1. Remove the display bezel:
a. Position the computer upright on a flat surface with the display panel open.
b. Remove the two rubber pads (1) that cover the display panel screws.
c. Remove the two Torx 9M2.5×5.0 screws (2) that secure the display bezel to the display
enclosure.
Component replacement procedures 121
