• 256 MB
• 512 MB
• 1 GB
• 2 GB
• 4 GB (HP 9000 rp3440 only). If 4 GB DIMMs are used, only one configuration (8 X 4 GB in
the first eight sockets) is supported.
Figure 6-33 shows the DIMM slot identification.
Figure 6-33 DIMM Slot Identification
rp3410 Memory Configuration
The HP 9000 rp3410 supports DDR SDRAM DIMMs with ECC and chip spare protection. This
server has 12 DIMM slots and supports a maximum of 6 GB of total system memory. Memory
usage in the rp3410 server varies with the model designation. In the original server (model
A7136A), memory is installed as one or two pairs in the first quad (group of four). This enables
memory configurations of two, four, eight, or twelve DIMMs. In the current server (model
A7136B), memory must be installed as quads. This enables memory configurations of four, eight,
or twelve DIMMs.
Thus, the HP 9000 rp3410 server must include a minimum of 512 MB (model A7136A) or 1 GB
(model A7136B) and can include up to 6 GB of memory in combinations of 256 MB, 512 MB, and
150 Removing and Replacing Components
