HP StorageWorks
SB40c storage blade
Dimensions
(HxWxD)
2.19 x 7.154 x 20.058 in (5.56 x 18.17 x 50.95 cm)
Weight
(unloaded)
8 lb (3.63 kg)
Weight
(loaded)
11 lb (4.99 kg)
Protocol Support
3Gb/s SAS
1.5Gb/s SATA
O/S Support
Defined by specific HP array controller or SAS/SATA adapter used;
please refer to the QuickSpecs and/or User Guide of the specific array
controller or adapter
LED Indicators
UID
System Health LED
Drive LED Indicators
(on drive trays)
Drive LED (top) - On-line/Activity
Drive Failure LED (bottom) - Drive Fault/Locate
Relative Humidity
(non-
condensing)
Operating
10% to 90%
Shipping
5% to 95%
Temperature Range
Operating
50° to 94° F (10° to 35° C°)
Shipping
-22° to 140° F (-30° to 60° C)
NOTE:
To maintain proper cooling and airflow, a drive blank or drive must occupy all bays during
operation.
Smart Array P400
Controller
Disk Drive and
Enclosure Interface
3G SAS (Serial Attached SCSI)
1.5G SATA (Serial Advanced Technology Attachment)
SAS Connectors
2 internal (SFF8484) x4 wide port connectors
Cache Memory Speed
DDR2-533MHz with provides up to 4.2 GB/s maximum bandwidth.
SAS Speed
x8 3G SAS provides 2.4GB/s maximum bandwidth.
Cache Memory
40-bit 256MB cache; ECC protection, battery-backed, and transportable
Logical Drives
Supported
Up to 32 logical drives
Maximum Logical
Drive Capacity
876GB (6 x 146GB)
Host Memory
Addressing
64-bit, supporting greater than 4GB server memory space
RAID Support
RAID 6 with ADG (Advanced Data Guarding)
RAID 5 (Distributed Data Guarding)
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)
Upgradeable Firmware
Upgradeable Firmware with recovery ROM feature
QuickSpecs
HP StorageWorks SB40c storage blade
Technical Specifications
DA - 12587 Worldwide QuickSpecs — Version 7 — 9/12/2007
Page 9
