4 Technical Information
Configuring a SCSI Accessory
120 English
Device Setup Menu
When you select a device from the Device Selections menu, the Device
Setup menu is displayed:
This menu provides information about an individual SCSI device.
To make changes to these settings, select an item from the list and
press .
Sync Rate (Mega
Bytes/sec)
This option lets you set the transfer rate for the device. The available
choices are Off, 10 MB/sec, 20 MB/sec, or 40 MB/sec. For example, for a
Fast SCSI device, you would select 10 MB/sec.
Width (bits)
This option lets you set the width, in bits, for the device. The choices are
8 or 16. For example, if the device is an external SCSI device, you would
set the width to 8 bits.
Symbios Logic SCSI Configuration Utility
Version 1.00
1. SYM53C875
Dev0 N/A Setup
Sync Rate (Mega Bytes/sec) 40 MB/sec
Width (bits) 16
Disconnect On
Read Write I/O Timeout (secs) 10
Scan for Device at Boot Time Yes
Scan for SCSI LUNS Yes
Queue Tags Enabled
Format None
Verify
Help.
Restore Default Setup
Exit this menu.
Use arrow keys to select from menu. Then press ENTER
BIOS Code Segment: C800
crystal.bk : cryst-4.fb4 Page 120 Monday, March 23, 1998 4:09 AM
