2–2 Maintenance and Service Guide
Troubleshooting
Using Computer Setup
Information and settings in Computer Setup are accessed from
the Main, Security, Advanced, or Tools menus:
1. Turn on or restart the notebook. Press f10 while the
F10
= ROM-Based Setup message is displayed in
the
lower-left corner of the screen.
❏ To change the language, use the cursor control keys
to
navigate to the Advanced menu.
❏ To view navigation information, press f1.
❏ To return to the Computer Setup menu, press esc.
2. Select the Main, Security, Advanced, or Tools menu.
3. To close Computer Setup and restart the notebook:
❏ Select Exit > Exit Saving Changes, and then press enter.
- or -
❏ Select Exit > Exit Discarding Changes, and then
press
enter.
- or -
❏ Select Exit > Load Setup Defaults, and then press enter.
4. When you are prompted to confirm your action, press f10.
