42
Content of the washing process
This part describes the process of each process.
( ) indicates it may be manually switched within the range contained in the bracket by pressing
the buttons. No ( ) means no switch.
( ) ( )
(Water-storage or water-injection rinsing 1~3 times)
1
~
3
(Water-storage or water-injection rinsing 1~3 times)
1
~
3
15
(15~3 )
50~20L
(50~20L)
3~6
(9~1 )
46
(60~28 )
Process
NORMAL
Washing Spinning
Required duration
(approximate)
Rinsing
Round 1
Sprinking rinsing
Water-storage +
water-injection rinsing
(Water-storage or water-injection rinsing 1~3 times)
1
~
3
no rinsing
(Water-storage or water-injection rinsing 1~3 times)
1
~
3
Water-storage rinsing Water-storage rinsing
Round 2
Automatic setup
of water level
30
(30~3 )
50~20L
(50~20L)
3
(15~3 )
20L
(30~20L)
60
50~20L
(50~20L)
9
30L
(30~20L)
25
50L
(50~20L)
63
(76~28 )
6
(9~1 )
12
(45~20 )
3
(9~1 )
100
(112~75 )
6
(9~1 )
36
1
68
(68~59 )
9
(9~1 )
HEAVY
SPEEDY
SOAK
SILK
BLANKET
Water-storage rinsing Water-storage rinsing
Water-storage rinsing Water-storage rinsing
Water-storage rinsing Water-storage rinsing
15
(15~3 )
50~20L
(50~20L)
103
(112~85 )
60
WIND
DEHYDRATION
(Water-storage or water-injection rinsing 1~3 times)
1
~
3
Water-storage rinsing Water-storage rinsing
Time required for washing
• The washing time includes the time of charging (volume of
15L per minute) and draining (standard condition).
15L
• The washing time depends on the water pressure, washing
quantity and drainage condition etc.
• In the "NORMAL", "HEAVY", "SOAK" and "WIND DEHYDRA-
TION" processes, the washing machine determine the opti-
mum washing mode by checking the load and texture of the
washings. The time shown in the above table are ones in
standard condition.(marked with
).
• There are certain errors between the "washing time" & "spin-
ning time" and the actual operation time.
• The "NORMAL", "HEAVY", "SOAK" and " WIND DEHYDRA-
TION" processes, the washing machine will stir the clothes for
after final spinning for fluey effect. (stirring may not be made
for some washing loads.)
Change of the options in the modes
• ( ) indicates it may be manually switched within the range
contained in the bracket by pressing the buttons.
( )
• Options in modes can't be changed after the completion of the
"washing" process.
• Changes can't be made during the period from the beginning
of charging to the time when the level of charged water reach
the stated standard.
Switch of modes
• Modes can't be switched after the starting of washing machine.
If it is necessary to switch, please cut off the power supply
first, and then proceed with the switch.
