Basic Operations (Tape Navigation) - 55 -
DISPLAY TAPE NO. DATA
When you want to review the stored tape data, use this option as follows.
1. Press GUIDE, then press 5.
The "TAPE DATA MENU" will appear.
When "1 TAPE DATA <OFF>" is specified, the options "2 AUTO TITLE <ON/OFF>",
"3 DELETE TAPE NO. DATA" and "4 DISPLAY TAPE NO. DATA" are not displayed.
2. Press 4. The screen displays tape numbers, months, dates, and days of the week of
the last recordings made on the tape.
3. Press SELECT or button specify the TAPE NO. you want to review. Press
SELECT button for lower numbers and SELECT for higher numbers.
For example, specify TAPE NO. 2.
4. Press 5. The detailed data of TAPE NO. 2 will appear.
If you want to review other tape data, press 5 again to restore the screen in Step 2.
Perform Steps 3 and 4.
5. Press GUIDE after you finish reviewing tape data.
Cautions and Reference for Tape Navigation
VCR's displays:
When you insert one of tapes - below, REM flashes in the VCR's display.
Non-recorded tape
