5
5
B. BATTERY COMPARTMENT
• Holds two AA-size batteries
C. RESET
• Resets all readings
D. CHANNEL SWITCH
• Selects the desired channel
E. WALL-MOUNT RECESSED HOLE
• Keeps the remote sensor on the wall
F. °C/ °F SWITCH
• Selects the temperature display in Celsius or Fahrenheit
TS13C SENSOR IS COMPATIBLE WITH ALL HONEYWELL
WIRELESS WEATHER STATIONS
BEFORE YOU BEGIN
• The remote sensor can be placed indoors or outdoors.
• We recommend using alkaline batteries for the remote sensor
when temperatures are above 32°F (0°C). We recommend using
AA lithium batteries when temperatures are below 32°F (0°C).
• Avoid using rechargeable batteries. (Rechargeable batteries
cannot maintain correct power requirements).
• Insert batteries before first use, matching the polarity in the
battery compartment.
• ALWAYS install batteries in the remote sensor before the main
unit.
• Press RESET after each battery change with a paper clip or
similar tool.
6
• During an initial setup, place the main unit as close as possible
to the remote sensor.
• After reception is established (the remote temperature will
appear on the main unit’s display), position the remote sensor
and the main unit within the effective transmission range of 100
feet (30 meters).
NOTE
:
1. Avoid setting manually the time and date on the main unit before the
remote temperature is displayed.
2. The effective operating range may be influenced by the surrounding
building materials and how the receiver (main unit) and transmitter
(remote sensor) are positioned.
3. Place the remote sensor so that it faces the main unit (receiver),
minimizing obstructions such as doors, walls, and furniture.
4. Though the remote sensors are weather-resistant, they should be
placed away from direct sunlight, rain or snow.
NOTE:
When the temperature falls below freezing, the batteries in
the outdoor remote sensors may have reduced voltage supply and a
shorter effective range. We recommend using lithium batteries at
temperature 32°F (0°C) and below.
