1. Tool storage tray:
provides internal tool storage for crevice tool,
furniture nozzle, and dusting brush.
2. Crevice tool
3. Furniture nozzle
4. Dusting
brush
5. Cover: remove by lifting up top section of carrying handle and
pulling forward.
6. Carrying handle
7. Extension wands:
use with power nozzle. If added length is desired
when using cleaning tools, add one or both wands to hose.
8. Spring latch:
locks extension wands together or locks wand to
nozzle or tool.
9.
Power nozzle:
automatically adjusts to different carpet pile heights.
10.
Large
wheels:
provide easy towing, when hose is used to pull
cleaner over carpet, area rugs and door sills.
11. ON-OFF control:
located on top of cleaner for convenient foot
operation.
12. Cord rewind control:
step on control to rewind cord for storage.
Hold plug until cord is rewound.
13. Cord clips:
fasten nozzle cord to extension wands.
14.
Receptacle:
connect power nozzle cord underneath hand grip.
15. Hand grip
16. Suction regulator:
close for maximum suction; open if power nozzle
is difficult to push on some carpet or if lightweight rugs or draperies
are being cleaned.
17. Plastic latch ring:
rotate to lock hand grip to extension wands or
cleaning tools.
Operate cleaner only at voltage specified on data plate on bottom of
cleaner.
