you must remove the media from the drive, turn it over, and insert it into the
drive again. For convenience, double-sided cartridges are labeled ″side A″ and
″side B.″
Removing the disc from the cartridge
You can remove DVD-RAM Type II discs from the cartridge for use in a
DVD-ROM drive.
Removing the disc from the cartridge
Using the tip of a ballpoint pen, push and break the lock pin tab1.To
remove the disc, use a ballpoint pen to push down on the cartridge-lid lock
2and pull the cartridge lid 3out to eject the disc. With the cartridge lid
open, the disc will eject.
Attention: Do not touch the recording side of the disc while it is exposed.
Returning the disc to the cartridge
To return the disc to the cartridge, align the label side of the disc 1with the
DVD-RAM cartridge label side. Insert the disc, and close the cartridge lid 2.
A clicking sound will ensure that the lid door is closed.
1-10 IBM DVD-RAM/DVD-R Drive: User’s Guide
