A SERVICE OF

logo

Open as PDF
next previous
Using the Security Screw
Using the Security Screw
To replace the coin screw with the security screw, do as follows:
1
Power off the computer; then disconnect the AC Adapter and
all cables from the computer.
*
2
Remove the screw with a coin; then install the security screw
* and tighten it with a 2.5-mm allen wrench.
*
3
Connect the AC Adapter; then power on the computer.
* You can use the security screw shipped with your computer to
* prevent devices, such as a hard disk drive, from being removed
* easily.
Security Screw
110 IBM ThinkPad 600E User's Reference