LV-671 User’s Manual Hardware Setup
CPU Cooler Installation 20
2.4.3 <CPU Cooler Installation>
The board accessories come with one CPU cooler, the cooler’s specification is listed below,
please check the installation steps before you start.
Notice: Installing the cooler improperly may cause the system unstable, if you face system rebooting or
other issue, please check this point.
Cooler Specification:
Rated Voltage Consumption Sound Level Rated Speed Air Flow
12V Max 0.12Amp Max 27dB 5000rpm Max 4.73CFM
The Cooler can compete with up to 2.0GHz of Intel Pentium M processor, if user needs to
use more upper frequency, please replace other coolers.
Cooler Installation Guide:
1. Remove the sticker on the base
2. Put the base through the
fixin
holes
3. Put the cooler through
the four
ills on the base
4. Press the plate and move
forward
4. Connect the fan connector on CPUFAN
