9
3
FREQUENCY AND CHANNEL SETTING
■ Selecting a memory channel
q Push [V/M] to select memory
mode.
•“X” or “M:” appears when a mem-
ory channel is selected.
w Rotate [DIAL] to change the indi-
cated memory channel.
•Only programmed memory chan-
nels can be selected.
•Rotate [DIAL] while pushing [FUNC]
to change the memory bank.
■ Lock function
The lock function prevents accidental frequency changes and
accidental function access.
➥Push [FUNC] + [MODE] for 2 sec. to toggle the lock func-
tion ON and OFF.
•[POWER], [↕(VOL)] and [SQL] can
still be accessed while the lock func-
tion is ON (default).
•Accessible switches can be set to 1
of 4 groups in set mode. See p. 42
for details.
■ Attenuator function
The attenuator prevents a desired signal from distorting when
very strong signals are near the desired frequency or when
very strong electric fields, such as from a broadcasting sta-
tion, are near your location.
The receiver has 4 attenuation levels for various operating
conditions. The attenuator functions when the operating fre-
quency is 1149.995 MHz or below.
q Push [FUNC] + [(SQL)ATT] to enter the attenuator setting
condition.
w Rotate [DIAL] to set the attenuation level 1–4 or turn the
attenuator function OFF.
•“ATT1”– “ATT4”appears in the color LCD when the color LCD is
ON;“ATT ”appears in the sub display when the color LCD is OFF.
e Push [(SQL)ATT] to exit the attenuator setting condition.
