Invacare Pronto M91 Base Manual

A SERVICE OF

next previous

SECTION 5—WHEELCHAIR OPERATION

Part No 1143153 41 Pronto® M91™Base with SureStep®

FIGURE 5.8 LCD Display Screens - Connected Devices Screen

Programmable Mono Port 1/2 or External Mode Switch

Theprogrammablemonoportorexternalmodeswitchinputislocatedattherearofthe

joystickontheleftside.Theprogrammablemonoportinputoffersthechoiceofthree

options:

•Remotedriveselect

•Remotestop/mode(reset)input

•Singleactuatorinput

Thesingleswitchfunctionsoperatethroughmonoport1.Anoptionaly‐cableallowsa

secondprogrammablefunctionthroughmonoport2.

Remote Stop Switch

Theremotestopswitchisusedtostopthewheelchair.

Remote Mode (Reset) Switch

Theremotemoderesetswitchfunctionsthesamewayasthemodeswitch.RefertoMode

Switchonpage 42.

Remote On/Off Switch

TheremoteOn/Offswitchinputislocatedattherearofthejoystickontherightsideand

allowsthepowerswitchtobeoperatedbyanabilityswitch(normallyopenmomentary

switchwithmonoplug).TousetheremoteOn/Offfeature,theDriveSelect/On/Offswitch

mustbeintheOnposition.Eachactivationoftheabilityswitchwillalternatelyturnthe

joystickOnorOff.

ICON DESCRIPTION

4-Switch Attendant Control

RIM Control

ECU (1 to 4)

Proportional Attendant Control

Compact Joystick

Sip and Puff Control

ASL Digital Control

ASL Analog Control

Shark Power Module Actuator