ENGLISH
43REFERENCES
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptom Remedy/Cause
General
• Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
• Check the cords and connections.
• The unit does not work at all. Reset the unit (see page 3).
• “Connect Error” appears on the display. Remove the control panel, wipe the connector, then attach
it again (see page 4).
FM/AM
• SSM automatic presetting does not work. Store stations manually.
• Static noise while listening to the radio. Connect the antenna firmly.
Discs in general
• Disc cannot be played back. Insert the disc correctly.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be skipped.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which you
used for recording.
• Disc can neither be played back nor ejected. • Unlock the disc (see page 11).
• Eject the disc forcibly (see page 3).
• Disc cannot be recognized (“No Disc,” “Loading
Error,” or “Eject Error” flashes).
Eject the disc forcibly (see page 3).
• Disc sound is sometimes interrupted. • Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
• “Please Eject” appears on the display. This occurs sometimes due to over-heating. Eject the disc
or change to another playback source.
MP3/WMA/AAC
• Disc cannot be played back. • Use a disc with MP3/WMA/AAC tracks recorded in the
format compliant with ISO 9660 Level 1, Level 2, Romeo,
or Joliet.
• Add the extension code <.mp3>, <.wma>, or <.m4a>
to the file names.
• Noise is generated. Skip to another track or change the disc. (Do not add
the extension code <.mp3>, <.wma>, or <.m4a> to
non-MP3/WMA/AAC tracks.)
• A longer readout time is required (“File Check”
keeps flashing on the display).
Do not use too many hierarchies and folders.
Continued on the next page
EN38-49_KD-AR880_G830[J]1.indd 43EN38-49_KD-AR880_G830[J]1.indd 43 2/6/07 6:02:42 PM2/6/07 6:02:42 PM
