English 9
ƽ
Risk of injury
Always switch off the appliance and pull out
the mains plug before care and maintenance
work.
ṇ Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
Î Clean the appliance and accessory parts
made of plastic with a commercial plastic
cleaner.
Î Clean the dust chamber with a dry wipe
cloth/ dust brush.
Note: Separate the telescopic suction pipe
from the handle to see the filter change indi-
cator.
Figure 15
Î If the filter change indicator in the cover
glows red, then plese change the filter
bag.
Î Use the closing lever and open the lid.
Figure 16
Î Unlock the holder of the filter bags and
pull towards the outside.
Figure 17
Î Close the filter bag using the closing flap,
remove the filter bag and dispose it off.
Figure 18
Î Push the new filter bag into the support
until the stop. First press the flap down-
wards; then push the holder into the cas-
ing and lock it at the appliance casing.
ṇ Caution
Close the lid only, if there is a filter bag in-
serted. After picking up small dust particle
(as for example plaster, cement etc) clean
the motor protection filter, change if neces-
sary.
Motor protection filter: change before the
last filter bag is removed from the filter bag
package.
Î The motor protection filter is behind the
inserted filter bag. Change the motor
protection filter before you insert the filter
bag.
Figure 19
Î Unlock the frame and remove.
Î Remove the lower part of the frame, take
out old engine protection filter and dis-
pose it off. Insert the new engine protec-
tion filter in the frame and replace the
lower part of the frame.
Figure 20
Î Insert and click the frame into its place.
HEPA filter: Change once a year.
Figure 21
Î Open cover.
Î Unlock the HEPA filter and remove.
Figure 22
Î Insert the new HEPA filter and click it into
place.
Î Close the lid.
The ComfoGlide nozzle must be cleaned
regularly!
Î Remove the nozzle from the suction
pipe.
Figure 23
Î Clean the back steering roller:
The easiest way to do this, is to remove
the roller. Unscrew the axle and pull out.
Dust fluff, hair etc. can now be removed
easily. Fit the steering roller back into
place.
Î Cleaning the front star wheels:
With the aid of a small scissor (e.g a pair
of nail scissors). Cut and remove
wrapped up hair along the cutting edge.
Suctioning any residues with the gap
nozzle.
Maintenance and Care
Cleaning the device
Replacing the filter bag
Change the motor protection filter
Change the HEPA-filter
Cleaning of the ComfoGlide nozzle
