If the receiver doesn’t respond
when you press a button on the
remote, you need new batteries.
We recommend replacing both
batteries at the same time for longer
battery life.
1 Remove the cover by pressing
down on the ridged area and
sliding it off in the direction of
the arrow.
2 Insert 2 AA-size alkaline batteries
(be sure to pay attention to the
(+) and (-) signs when you’re
inserting the batteries).
3 Close the cover.
Loading and replacing the batteries
11.
You can use your SPECTRUM
system remote for many functions.
A few tips
• Depending on temperature,
humidity, and other environmen-
tal conditions, the operating
range of your remote is approxi-
mately 30’ and up to 30° on
either side of the receiver’s
remote light sensor.
• When the operating distance of
your remote begins to get
shorter, replace both alkaline
batteries with new ones.
• When you press 2 buttons one
after the other, press each
button securely for more than 1
second each.
• The remote may malfunction if
direct sunlight or high-frequency
fluorescent light enters the light
sensor. In this case, either move
the audio system, or remove the
light source.
Important:
The batteries that came with this
system are test batteries and may
not last as long as alkaline batteries.
The remote
10.
