English
|
47
Deactivating Security Code
To deactivate the Security Code function.
1
Select the Standby
Press the [SRC] button.
Select the “STDBY”/ “STANDBY” display.
2
Enter Function setting mode
Press the [VOL] knob.
3
Select Security Code mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Initial Settings”/ “INITIAL SET” >
“Security Clear”/ “SECURITY CLR”
4
Enter Security Code mode
Press the [VOL] knob for at least 1 second.
When “Enter”/ “ENTER” is displayed, “[–][–][–][–]”/
“CODE” is also displayed.
5
Select the digits to enter
Press the [4] or [¢] button.
6
Select the Security Code numbers
Turn the [VOL] knob.
7 Repeat steps 5 and 6, and complete the
Security Code.
8
Confirm the Security Code
Press the [VOL] knob for at least 3 seconds.
“Clear”/ “CLEAR” is displayed.
The Security Code function deactivates.
9
Exit Function setting mode
Press the [ ] button for at least 1 second.
⁄
• If a wrong security code is entered, “Error”/ “ERROR” is
displayed. Enter a correct security code.
