English
|
17
Display Control
08 Display Type Selection: “Display Control” ➤ 5
types
Sets the display pattern.
Display type Display information
Type A Displays 2 lines of text.
Type B Displays a line of text.
Type C Displays the status.
Type D Displays the clock.
Type E Displays the spectrum analyzer.
Refer to <Selecting Display Type> (page 22).
09 Display Side Selection: “DISP Side Select” ➤
2 types
Sets the Type A, B, D, and E side display to ON/
OFF. Refer to <Selecting Display Type> (page 22).
10 Display Text Selection: “DISP Text Select”
Sets the Type A and B text display. Refer to
<Selecting Text Display> (page 22).
11 Display Graphic Selection: “DISP GRPHC
Select” ➤ 6 types
Sets the Type E spectrum analyzer display. Refer to
<Selecting Display Type> (page 22).
Clock & Date Settings
12 Adjusting the Clock: “Clock Adjust”
Sets the clock.
1. Turn the Control knob to adjust the hour, and
then press the [ENTER] button.
2. Turn the Control knob to adjust the minute, and
then press the [ENTER] button.
You can do this adjustment when 13
Synchronizing the Time is set to “OFF”.
13 Synchronizing the Time: “Time Synchronized”
➤ “ON”, “OFF”
Synchronizing the RDS station time data and this
unit’s clock.
14 Adjusting the Date: “Date Adjust”
Sets the date. Refer to <Adjusting the Date>
(page 4).
15 Selecting Date Mode: “Date Mode” ➤ 7 types
Sets the date display mode. Refer to <Adjusting
the Date> (page 4).
Display & Illumination Settings
16 Faceplate Color Settting: “Color SEL”
Sets the faceplate illumination color. Refer to
<Illumination Color Selection> (page 23).
Function of KDC-BT50U/ KDC-5047U.
17 Display ON/OFF: “DISP OFF Mode” ➤ “ON”,
“OFF”
If this unit is not operated at least 5 seconds with
“ON” selected, the display turns off. During a
setup mode, the display will not turn off even if 5
seconds lapse.
Function of KDC-BT50U/ KDC-5047U.
18 Display Dimmer: “Display Dimmer” ➤ “Auto”,
“Manual1”, “Manual2”, “OFF”
Dims the display part in conjunction with the light
switch of the vehicle.
19 Text Scroll: “Text Scroll” ➤ “Auto”, ”Manual”
Setting to “Auto” scrolls the displayed text
automatically.
20 Display Bluetooth device Status: “BT DVC
Status”
You can display the connection status, signal
strength, and battery level.
: Battery level of cell-phone.
: Signal strength of cell-phone.
Function of KDC-BT50U/ KCA-BT200 (Optional
Accessory).
21 Illumination Dimmer: “ILLUMI Dimmer” ➤
“Auto”, “Manual1”, “Manual2”, “OFF”
Reduces the key Illumination brightness.
Auto: Dims the illumination in conjunction with
the Light switch of the vehicle.
Manual1: Dims the illumination constantly.
Manual2: Dims the illumination darker than
Manual1.
OFF: Does not dim the illumination.
22 Illumination Effect: “ILLUMI Effect” ➤ “ON”,
”OFF”
Sets whether the key illumination color is
changed in conjunction with the key operation.
23 Music-linked Illumination Effect: “ILLUMI Music
SYNC” ➤ “ON”, ”OFF”
Sets whether the key illumination color is
changed in conjunction with the sound volume.
