Kenwood KDC-MP745U Manual

A SERVICE OF

next previous

English

|

23

Bluetooth Audio Operation

Connecting a Bluetooth Device

Before use the Bluetooth device, you need to

connect Bluetooth device to this unit.

Pairing (Registering from Bluetooth devices)

To make your Bluetooth Audio player usable with

this unit, you need to register it (pairing).

1

Turn on this unit

Press the [SRC] button.

2

Start registering this unit by operating the

Bluetooth device

By operating the Bluetooth device, register the

audio player (pairing). Select “KENWOOD BT CD/R-

4P1”/“KCA-BT200”fromthelistofconnectedunits.

3

Enter a PIN code

Input the PIN code (“0000”) in the Bluetooth

device.

Check that registration is complete on the

Bluetooth device.

✍ PINcodeissetto“0000”asthedefault.Youcan

change this code. Refer to <Registering PIN

Code>(page50).

4

By operating the Bluetooth device, start

Bluetooth connection.

⁄

• Ifpairingdoesnotsucceed,tryfollowings.

 –PINcodeissetto“0000”.See<Registering PIN Code>

(page50)

– Turn off the power of this unit and turn it back on. And

then try the pairing operation again.

– If other audio players have been registered, delete

them. And then try the pairing operation again. See

<DeletingaRegisteredBluetoothdevice>(page51)

• Whenregisteringfromthisunit,referto<Registering

Bluetooth device> (page 49).

• FordetailsontheBluetoothAudioplayerwhichcanbe

connected, see <About the Bluetooth Audio player>

(page 63).

Basic Operation

Selecting Bluetooth Audio source

Press the [SRC] button. Turn the [VOL] knob and

press it when the desired item is displayed.

Select the “BT Audio” display.

✍ SRC Select mode 2: Pressing the [SRC] button

repeatedly switches source.

Pause and play

Press the [38] button.

Music Search

Press the [4] or [¢] button.

⁄

• Allorsomeoftheoperationsabovecannotbe

performed if the Bluetooth audio player is not ready for

remote control.

• SwitchingtotheBluetoothaudiosourcedoesnotstart

or stop playback automatically. Perform the operation for

starting or stopping playback.

• Someaudioplayerscannotbecontrolledremotelyor

reconnected after Bluetooth disconnection. Operate the

main unit of the audio player to connect Bluetooth.

SRC

4

MENU VOL

¢38

/PLAY MODE

Function of KDC-X994/ KDC-BT945U

KDC-X794/ KDC-MP745U with BT200 (Optional Accessory)