A SERVICE OF

logo

5
6
8 9
5. First connect the Pulse Wires (26) to the T-Shaped Handlebar
(10). Then connect the T-Shaped Handlebar (10) to the
Main Upright (2) with Screws (55), Flat Washers (50) and
Locknuts (49).
6. Curved Washers (79) should already be on Main Upright
posts. Slide the left and right handlebars (3, 4) onto the
Main Upright (2). Secure handlebars with Washers (61),
Snap Caps (21), Washers (69), Nuts (52), and Nut Caps (22).