GREASING AND SERVICE TABLE 93
K10N K75A K150A J1A J2A
Chassis
Check the steering head bearing and adjust if necessary.x
• • •
Check the swingarm bearing.x
• • •
Check deflector.x
• •
Check the eccentric shaft adjustment.x
• •
Check all screws to make sure they are tight.x
• • •
Wheels Check the tire condition. ( S. 143) • • •
Checking the tire air pressure. ( S. 145) • • • • •
Check the chain wear. ( S. 127) • • •
Check the rear sprocket / engine sprocket / chain sliding guard to
ensure that they are tight.x
• • •
Check the rear sprocket / engine sprocket for wear. ( S. 126) • • •
Check the chain tension. ( S. 123) • • •
Clean the chain. ( S. 122) • • • • •
Check chain sliding guard. ( S. 128) • • • • •
Check wheel bearings for play.x
• • •
Check the rear hub shock absorbers.x ( S. 143)
• • • • •
K10N: after 1,000 km (621.4 mi)
K75A: every 7,500 km (4,660 mi)
K150A: every 15,000 km (9,320 mi) / after every sporting use
J1A: annually
J2A: every 2 years
