ENGLISH
27
Checking the gear oil level
To check the gear oil level, first remove the plug 1. With the motorcycle
parked in an upright position, a small quantity of oil should flow out of the
indicator opening
2. If oil must be added, tilt the motorcycle and pour
automatic gear oil ( Shell Donax TA) into the bore.
!
CAUTION
!
L
ESS OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR.
T
HEREFORE, ONLY USE BRANDED PRODUCTS (SHELL Donax TA).
Changing gear oil *
The engine must be warmed up before changing the gear oil. Park the
motorcycle on a horizontal surface, remove the oil drain plug
3 and drain
the used oil into an appropriate container. Clean the sealing surface, mount
the oil drain plug together with the gasket and tighten to 15 Nm.
Remove stopper
4 and fill in 0.15 liters of automatic gear oil (Shell Donax
TA). Mount the stopper and check the engine for tightness.
!
CAUTION
!
L
ESS OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR.
T
HEREFORE,
ONLY USE BRANDED PRODUCTS (SHELL Donax TA).
1
2
3
4
