LG - Life's Good 47LY970H Manual

A SERVICE OF

next previous

13

206-4260

EZ-Manager Wizard (Cont.)

Initiate Conguration or Exit the EZ-Manager Wizard

The Welcome screen provides a brief introduction to the EZ-Manager Wizard.

WELCOME TO LG’S EZ-MANAGER WIZARD

EXIT

NO PRO:CENTRIC

.

Use this setup wizard to conﬁgure the TV for Pro:Centric and/or Free-To-Guest (FTG) operation.

Select NEXT to continue.

.

If a Pro:Centric Server will not be installed and/or you do not wish to use the wizard to conﬁgure this TV for FTG

Mode, you may exit the wizard.

Select NO PRO:CENTRIC to disable the Pro:Centric feature of this TV, or select EXIT to quit.

This setup wizard will start automatically in 10 seconds.

NEXT

Note: If there is no user action in this screen within 10 seconds, the wizard will proceed to the

rst conguration step. Once the wizard has proceeded, it is not possible to return to the Welcome

screen; however, if you simply wish to exit the wizard, you can do so by selecting the “Exit” option

from the subsequent screen(s).

From the Welcome screen, you have the following options:

• To proceed with the EZ-Manager Wizard, use the arrow keys on the Installer Remote to select/

highlight NEXT and press OK. Then, continue to the “TV Conguration Options” section on the

following page.

• To exit the wizard, but retain the use of the Pro:Centric remote management feature on this TV

(i.e., Installer Menu item 119 DATA CHANNEL set to 255) in the future, use the arrow keys on

the Installer Remote to select/highlight EXIT and press OK. In the conrmation pop-up window,

select OK, and then press OK once more on the Installer Remote.

• If you do not intend to install a Pro:Centric server on this system and you do not wish to use the

wizard’s Zoning or USB conguration options, exit the wizard as follows: Use the arrow keys on

the Installer Remote to select/highlight the NO PRO:CENTRIC option and press OK. This will

disable the Pro:Centric feature of this TV (i.e., Installer Menu item 119 DATA CHANNEL will be

set to 0) and exit the wizard. In the conrmation pop-up window, select OK, and then press OK

once more on the Installer Remote.