A SERVICE OF

logo

Section 2 Hardware Installation
9
2.2 Rackmount Installation
Before you start please verify that all parts are
included according to the package contents.
If you want to install the CPU Switch in a 19” server
rack please attach the enclosed 19” rackmount
brackets using the included screws.
2.3 Connecting an External Power Switch option
At the time of writing (November 2006) the P16-IP supports the following external power switch
options. Please refer to the individual manufacturers manuals for advice on connecting to the
P16-IP.
Avocent SPC1 800/1600
Sentry In-Line Power Module
Leaning ePowerSwitch