T
he TUNER MODE control allows you
to change the TV’s signal input to
either ANTENNA, CABLE, or AUTO mode.
It’s important for the TVto know what
type of signal that is connected. (From a
Cable TV signal or a normal Antenna sig-
nal.) In the AUTO mode, when the AUTO
PROGRAMfeature is activated, the TV will
automatically choose the correct mode.
1
Press the MENU button on
the remote to show the on-
screen menu.
2
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll
through the on-screen menu until
the word INSTALL is highlight-
ed.
3
Press the CURSOR RIGHT
ᮣ button to display the
INSTALL menu features.
4
Press CURSOR UP ▲ or
DOWN ▼ buttons to scroll
the Install features until the
words TUNER MODE is high-
lighted.
5
Press the CURSOR RIGHT
ᮣ button to select either
ANTENNA, CABLE,or
AUTO mode.
6
When finished, press the
STATUS /EXIT button to
remove the on-screen menu
from the TV’s screen.
