Audio 37
Change Audio settings based on other equipment you con-
nected to the DVD Player or according to your Disc sound
features.
1
While playback is stopped, press SETUP. The
QUICK SETUP screen will appear.
2
Press B to select CUSTOM at the top of the
menu, then press OK.
3
Press B to select AUDIO ( ) , then press
OK.
4
Press
oo
or
pp
to select DRC, DOLBY DIGI-
TAL, or DOWN SAMPLING, then follow step
5 accordingly.
5
● If you selected DRC, press OK repeatedly to turn
Dynamic Range Control (DRC) ON or OFF. Choosing
ON compresses the range of volume by suppressing
loud sounds and raising low sounds.
● If you selected DOLBY DIGITAL, press OK repeat-
edly to select ON or OFF. Select ON if you used the
COAXIAL DIGITAL AUDIO OUT jack to connect the
DVD Player to a stereo that is Dolby Digital compati-
ble. Details are on page 14. Otherwise, choose OFF.
● If you selected DOWN SAMPLING, press OK
repeatedly to choose ON or OFF. Choose ON to set
downsampling to 48 kHz. Choose OFF to set down-
sampling to 96 kHz.
6
Press SETUP to remove the menu.
• Dolby Digital sound must be
available on the DVD.
• You can adjust DOLBY DIGITAL
in the QUICK SETUP menu that
appears when you first press
SETUP. With QUICK selected,
press OK. Press
p
to select
DOLBY DIGITAL. Press OK to
choose ON or OFF. Press SETUP
to remove the menu.
• When you play a Disc that has
copyright protection, downsam-
pling will be at 48 kHz, even if
you set DOWN SAMPLING to
OFF.
Helpful Hints
1,6
2-5
