147
Delete saved remote control codes
Codes can be erased in three ways: by buttons, sources, and by all
memory contents.
n Delete remote control codes for each button
1
Press and hold SET until the
LEARN indicator blinks.
2
Press input source select buttons
to select the input source you
want to delete.
The input source is shown in the remote
control display.
3
Press and hold ON/STANDBY X
and press the learned button to
be erased twice.
“ERASE” is shown in the remote
control display, and the mode returns to
LEARN mode.
•To return the normal mode, press
SET.
n Delete remote control codes for each input
source
1
Press and hold SET until the
LEARN indicator blinks.
2
Press and hold ON/STANDBY
X and press the learned input
source select buttons to be erased
twice.
“ERASE” is shown in the remote
control display.
3
Press ENTER to continue erasing.
The indicator blinks twice and the
mode returns to LEARN mode.
•To cancel the erasing operation, do not
press ENTER, and simply press any other
button.
•To return the normal mode, press SET.
n Delete remote control codes for all input
sources
1
Press and hold SET until the
LEARN indicator blinks.
2
Press and hold ON/STANDBY X
and press AVR .
LEARN indicator lights.
3
Press ENTER to continue erasing.
“ERASE” is shown in the remote
control display, and the mode returns to
LEARN mode.
•To cancel the erasing operation, do not
press
ENTER, and simply press any other
button.
•To return the normal mode, press SET.
Operating learn function
