A SERVICE OF

logo

Adjust DM Brake
NOTE: Each brake shoe must be adjusted
separately.
1. Insert an adjusting tool through the holes in
the backing plate to engage the teeth on the
adjusting bolts. To expand the shoes, move
the tool handle down when the tool is in the
right hand slot, and move the handle up when
the tool is in the left hand slot. Figure 3.9.
2. Adjust the lining tight against the brake drum,
then release the adjustment until the brake
drum just can rotate freely.
3. Install the adjusting slot covers.
26
Section 3
Mechanical Brakes
Figure 3.9.
ADJUSTING
SLOT