5.4 Network Dedicated Instruction
5.4.7 RLPASET instruction
5-139
G_RLPASET
5
MODULE DEDICATED
INSTRUCTION
G_RLPASET
5.4.7 RLPASET instruction
G_RLPASET
*1: Local devices and file registers per program cannot be used as setting data.
This instruction sets the network parameters to the master station and starts up the data link.
G(P)_RLPASET
P: Executing condition
:
indicates any of the following
instructions.
G_RLPASET GP_RLPASET
Input argument EN:
Executing condition :Bit
Un*:
Start I/O number of the module
(00 to FE: Higher two digits when expressing the I/O number in
three digits)
:ANY16
s1:
Variable that stores control data :Array of ANY16 [0..7]
s2:
Variable that stores slave station setting data :Array of ANY16 [0..63]
s3:
Variable that stores reserved station specification data :Array of ANY16 [0..3]
s4:
Variable that stores error invalid station specification data :Array of ANY16 [0..3]
s5:
Variable that stores send/receive and auto-refresh buffer
assignment data
:Array of ANY16 [0..77]
Output argument ENO:
Execution result :Bit
d:
Variable that turns ON upon completion of the instruction
d[1] also turns ON at the time of error completion.
:Array of bit [0..1]
Setting
data
*1
Internal device
R, ZR
J\
U\G
Zn
Constant
Others
Bit Word Bit Word
CC-Link
Structured ladder/FBD
ST
G_RLPASET
EN ENO
Un*
s1
s2
s3
s4
s5
d
G_RLPASET
(EN, Un*, s1, s2, s3, s4, s5, d);
ENO:=
s2
s3
s4
s5
d
