2SHU DWLQJ LQVWUXFWLRQV 0RWRU +RHV English
7
8VERWTSVXEXMSR
1SZMRKXLIQEGLMRI
For manoeuvring or traversing short
stretches.
■ Move the depth gauge/
transportation wheel into the
transport position (Fig. ).
■ Raise the steering handle until the
tiller blades no longer touch the
ground.
■ Move the machine carefully.
8VERWTSVXEXMSR[MXL
E WYMXEFPIZILMGPI
(ERKIVSJMRNYV]
&IJSVIXVERWTSVXEXMSR
r 7[MXGLSJJXLIIRKMRI
r 6IQSZIXLIWTEVOTPYKXIVQMREP
r ;EMXYRXMPXLIIRKMRILEWGSSPIH
HS[R
■
Transport the machine in a
horizontal position in or on a vehicle.
■ Ensure that the machine cannot
roll or slip.
7IVZMGMRKGPIERMRK
(ERKIV
8STVSXIGXEKEMRWXMRNYV]FIJSVIEPP
[SVOSRXLIETTPMERGI
r W[MXGL3**XLIIRKMRI
r [EMXYRXMPEPPQSZMRKTEVXWLEZI
GSQIXSEGSQTPIXIWXSTERH
XLI IRKMRILEWGSSPIHHS[R
r VIQSZIXLIWTEVOTPYKGSRRIGXSV
SRXLIIRKMRIMRSVHIVXSTVIZIRX
XLIIRKMRIJVSQEGGMHIRXEPP]FIMRK
WXEVXIH
r TPIEWISFWIVZIXLIEHHMXMSREP
WEJIX]MRJSVQEXMSRMRXLIIRKMRI
QERYEP
'EYXMSR
8MPXXLIETTPMERGIMRWYGLE [E]XLEX
XLIWTEVOTPYKMWEXXLIXSTWSXLEX
XLIIRKMRIMWRSXHEQEKIHHYIXS
TIXVSPSVSMP
7IVZMGMRK
'EYXMSR
4PIEWISFWIVZIXLIQEMRXIRERGI
MRWXVYGXMSRWMRXLIIRKMRIQERYEP
%X XLIIRHSJXLIKVEWWGYXXMRK
WIEWSRLEZIXLIETTPMERGI
GLIGOIH ERHWIVZMGIHMREWTIGMEPMWX
[SVOWLST
'EYXMSR
)RZMVSRQIRXEPLE^EVHGEYWIH
F] IRKMRISMP
%JXIVGLERKMRKSMPKMZIXLI[EWXI
SMP ]SYLEZIHVEMRIHXSEGIRXVI
EYXLSVMWIHXSHMWTSWISJ[EWXISMP
SV XSERSXLIVHMWTSWEPGSQTER]
1EMRXIRERGITPER
&IJSVIIEGLYWI
■ Check the oil level, fill up if
necessary.
■ Check screw connections for firm
seating, tighten if necessary.
■ Check the safety devices.
0YFVMGEXMRK
■ Lubricate all moving and rotating
parts with a light oil.
1EMRXIRERGI[SVOSRXLIIRKMRI
■ See Engine instructions.
3RGITIVWIEWSR
■ Have the machine tested and
serviced in a specialist workshop.
!
!
1EMRXIRERGI[SVO
After use 10 h 25 h 50 h 100 h Each
season
As
required
Clean side shields and hoeing assembly ●
Clean air filter ●
Exchange air filter ●
Change oil
) ●
Grease moving and rotating parts ●
Clean spark plugs
) ●
Have the spark plugs changed
) ●
Clean air-cooling system and exhaust
) ●●
Check clutch setting, if required have
it re-adjusted
)
●
Have the carburettor setting checked
) ●
Sharpen the hoeing assembly or
exchange it
)
●
