5
Installation
Installing the printing supplies
This machine prints incoming faxes and copies with a laser print engine. The engine
requires two types of printing supplies (sometimes also called consumables):
• The drum cartridge — It yields 74,000 normal letter- or A4-sized printouts.
By “normal,” we’re referring to the amount of text and/or graphics on each page.
This is based on an industry-standard test document.
• The toner bottle — It yields 11,000 “normal” letter- or A4-sized printouts.
Installing the drum cartridge
1
Unpack the new drum cartridge from its car-
ton. Then remove the seal from the cartridge.
2
Remove two pieces of tape and sponge (rear) from the drum cartridge.
3
Pull up the printer cover release and
open the printer cover.
Important: Never touch the elec-
trical contacts inside
the printer cover and
under the drum car-
tridge, as an
electrostatic discharge
may damage the
machine.
4
Shake the new drum cartridge hori-
zontally.
5
Align the green labels on both ends of
the new drum cartridge with the
green labels on the rails of the
machine and set it to the machine.
