Navman ICN 550 Manual

A SERVICE OF

next previous

63

iCN

550

User Manual

3. Modify the POI settings as required:

If you want to...

Then...

activate the POI

select the

Active

check box.

Note: If you do not activate the POI, you will be

able to configure only the

POI Visibility Level

and

Icon File

settings.

enable a visual warning when the

POI is in close proximity

select the

Visual Alert

check box.

enable a warning chime when the

POI is in close proximity

select the

Audio Alert

check box.

change the units used to measure

distance for this POI

select the

Metric

or

Imperial

option.

select the distance from the POI

at which the visual warning should

display or the warning chime

should sound

select the distance from the

Distance

box.

indicate the priority of this POI

when one or more additional POIs

are in the same locale

move the

POI Visibility Level

slider left or right.

select a custom POI type icon to

display on the map (if you do not

select a custom icon, a default icon

will display)

Type the path to the icon ﬁ le to be used to

represent the POI type in the

Icon File

box or

select the icon ﬁ le from your local or network

drive by clicking

, locating the ﬁ le and

clicking

Open

. The ﬁ le must be a bitmap (.bmp)

graphic with a minimum of 6x6 pixels and a

maximum of 32x32 pixels.

4. Click

OK

and follow the prompts.

OK and follow the prompts. OK

The POI ﬁ le is saved to the iCN as a Custom POI type.

• If you want to change the ﬁ le name, edit the ﬁ le name in the

POI File Name

window

File Name

box, then click

OK

.

The ﬁ le name can be up to eight characters and cannot contain spaces.

Deleting a Custom POI File from your iCN

1. On the

Map

menu, click

Points of Interest

.

The

POI Editor

window will open.

POI Editor window will open.POI Editor

2. On the

File

menu, click

Manage POI Files

.

The

Manage POI Files

window will open, displaying a list of custom POI ﬁ les installed on

your iCN.

3. Click the

File Name

or

Size

of the POI ﬁ le to delete.

4. Click

Delete

.

The ﬁ le is removed from the list, but is not yet deleted.

5. To select another ﬁ le to delete, go back to step 2; otherwise, proceed to step 6.

6. Click

OK

and accept the changes.

OK and accept the changes. OK

The selected ﬁ le or ﬁ les are deleted.