GS700AT Hardware Installation Guide
Physical Description 3-3
v1.0, October 2008
LED Designations
This section provides an explanation for the following LED types:
• “Port LEDs”
• “System LEDS”
Port LEDs
The following table describes the port LED designations.
Table 3-1. Port LEDs
System LEDS
The following table describes the port LED designations.
Port LED Designation
24/48-10/100/1000 Ports
- One LED/Port
Link/ACT LED • Off - No 10/100/1000Mbps link is established on
the port.
• Solid Green - A valid 1000Mbps link is established
on the port.
• Flashing Green - Packet transmission or reception
is occurring on the port at 1000Mbps.
• Solid Yellow - A valid 10/100Mbps link is
established on the port.
• Flashing Yellow - Packet transmission or
reception is occurring on the port at 10/100Mbps.
Note: If port 45-48 media is SFP, the copper LED
displays the OFF status.
4-SFP Ports - One LED/
Port
SFP Link/ACT LED • Off - No link is established on the port.
• Solid Green - A valid 1000Mbps SFP module link
is established on the port.
• Flashing Green - Packet transmission or reception
is occurring on the port at 1000Mbps.
• Solid Yellow - A valid 100Mbps SFP module link is
established on the port.
• Flashing Yellow - Packet transmission or
reception is occurring on the port at 100Mbps.
Note: If port 45-48 media is copper, the SFP LED
displays the OFF status.
