❐ You can operate this unit by pressing buttons on the main unit and the remote control unit, and touch pan-
els on the main unit.
≥Some operations can be activated by pressing buttons only on main unit or remote control unit.
Those cases are described in the instructions.
Example: Press [OPEN] on the main unit.
≥These instructions describe buttons that are concerned with operations as follows.
Example: Press [VOL "] or [VOL #]/["] or [#].
E
N
G
L
I
S
H
4
CQ-DF802W
19
(Display)
E
N
G
L
I
S
H
3
CQ-DF802W
18
Name of Controls Functions (Main Unit and Touch Panel)
Example: Press /["] or [#].
Example: Press /[MENU]/[DISP].
EXIT
[buttons on the main unit]/[remote control unit]
/[remote control unit]
(➡ above.)
cursor on the touch panel
/[buttons on main unit]/[remote control unit]
(➡ above.)
Spectrum Analyzer display on the touch panel
["] [#] VOL (Volume)
≥Adjusts the sound volume.
(➡ page 21)
[MENU]
≥Enters the menu setting
mode.
≥Returns to the regular
mode during menu setting.
[BAND] (APM/;/1)
(Auto Preset Memory/Pause)
≥Selects a band. (➡ page 22)
≥Pause CD playing.
(➡ page 25)
≥Sets the auto preset memory
(APM) mode. (➡ page 23)
[OPEN]
≥Opens the front panel.
(➡ page 21)
['] (Release)
≥Releases the front panel.
(➡ page 52)
MUTE
(Indicates . )
≥Lowers the volume.
(➡ page 21)
Dot display
(Indicates .)
≥Changes the display.
(➡ pages 22, 25, 29)
≥Returns to the previous
display.
DISPLAY
Note:
≥Press the Spectrum Analyzer display to active the
cursor of the touch panel
on
VOL
CQ-DF802W
MENU
OPEN
BAND
APM/
;
/
1
MOSFET
50W
X
4
Source display (Indicates .)
• Switches off the power. (➡ page 20)
(Press and hold.)
• Selects a source. (➡ page 20)
≥Radio
()
≥CD player mode
≥CD changer control
SOURCE
Spectrum Analyzer (S·A) display (➡ page 36)
≥Clock basics (➡ page 21)
,
(Minute)
≥Radio mode (➡ page 22)
(Preset)
• Enters a preset memory mode. (➡ page 23)
≥CD player mode (➡ page 24)
(Track)
≥CD changer control (➡ page 28)
(Track),
≥Menu setting mode
• Returns to the previous display.
• Determines an operation or item in menu set-
ting mode.
Cursors
(Hour/minute/preset/disc/menu/submenu)
≥Selects (vertically) or adjusts an operation or
item.
≥Adjusts the clock. (➡ page 21)
≥Selects a preset memory. (➡ page 23)
≥Selects disc. (➡ page 28)
(Tune/track/setting)
≥Selects (horizontally) or adjusts an operation or
item.
≥Selects or searches frequency/track.
(➡ pages 22, 25, 28)
Disc slot
≥Loading the disc. (➡ page 24)
[<] (Eject)
≥Ejects the disc. (➡ page 24)
Touch panel
≥Switches on the power.
(➡ page 20)
Remote control sensor
Note:
≥Operations can be performed no
matter which part of the touch
panel is pressed BUT ONLY
WHEN THE POWER IS ON.
§ The brightness of the screen illustrations in this manual is different from the actual screen brightness.
≥AUX-IN setting
≥Menu setting mode
• Returns to the previous display in
menu setting mode.
