PC Programming Manual References
4.3 [2-2] Operator & BGM— PBX Operator—Day, Lunch, Break, Night
12.6 [10-4] Miscellaneous
—
Intercept—Routing to Operator - No Destination (Destination is not
programmed.)
PT Programming Manual References
[006] Operator Assignment
Feature Manual References
12.1.5 Operator Features
9.1.13 Intercom Call
Description
An extension user can call another extension user.
Conditions
• Extension Number/Name Assignment
Extension numbers and names are assigned to all extensions. The assigned number and name of the
other extension are shown on display PTs during intercom calls.
• DSS Button
It
is possible to call another extension by simply pressing the corresponding Direct Station Selection (DSS)
button. Any flexible button can be customized as a DSS button.
• Call Directory—Extension Dialing
Display proprietary telephone (PT) users can make a call by selecting stored names on the display.
• Alternate Receiving—Ring/Voice
A PT user can select to receive intercom calls by ring tone or by voice, through personal programming
(Alternate Receiving—Ring/Voice). If a user selects voice-calling, the calling party talks to the user
immediately after a confirmation tone. Denying voice-calling can also be selected.
• Alternate Calling—Ring/Voice
A caller can change the called party’s preset call receiving method (ring tone or voice) temporarily. By
doing so, ring-calling is switched to voice-calling, or vice versa, at the called party. The called party may
deny voice-calling.
• PDN/SDN (KX-TDA100/KX-TDA200/KX-TDA600 only)
It is not possible to temporarily change the called party’s preset call receiving method when making a call
using a Primary Directory Number (PDN) button or Secondary Directory Number (SDN) button (®
13.1.7 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension).
• Tone after Dialing
After dialing an extension number, a user will hear one of the following:
Type Description
Ringback Tone Indicates the called party is being called.
Confirmation Tone Indicates the called party has set voice-calling.
Busy Tone Indicates the called party is busy.
168 Feature Manual Document Version 2008-11
9.1.13 Intercom Call
