35
3-8. Setup – Network Mode
Set up your network parameters on the Network Setup screen.
Figure 3.8.1. NETWORK setup screen
Table 3.8.1. Menu items in Network Setup screen
Item Description
PORT
Port number (Default: 5445)
CLIENT ACCESS
Enable/Disable remote access through client software.
BANDWIDTH SAVING
Enable/Disable only key frame transmission. “ON” mode is
favorable for use of low network bandwidth. Mostly, set “OFF” for
normal use.
NETWORK TYPE
Set the type of network connection. Options are:
LAN, DHCP, ADSL
Note. Other parts of the Network Setup screen change depending
on what network type you select.
DHCP
Sets to use HDCP (If this is selected, DVR automatically get IP
varying from time to time from network.)
ADSL (PPPoE)
ID: Registered ID is necessary for ADSL connection.
Password: Registered password is necessary for ADSL connection.
LAN
IP: Register IP address that is assigned for DVR.
Gateway: Register Gateway that is assigned for DVR.
Subnet Mask: Register Subnet Mask that is assigned for DVR.
DDNS
Enable/disable using domain name address through DDNS server.
“ON”mode, DDNS server name appears for domain registration.
The DDNS sever name is ns.standalone4ch.com.
CAUTION: Do not change this sever name. If this is changed, the
