Pentair, Inc. VS-3050 Manual

A SERVICE OF

next previous

11

Starting the pump

To start the pump

1. EnsurethatthepumpispoweredonandthegreenpowerLEDison.

2. PresstheStart button(LEDon)tostartthepump.

Note: When the pump is using a modied speed and is powered down, the next time the pump is

powered up, the pump will use that same speed.

Stopping the pump

To stop the pump

• PresstheStop buttontostopthepump.

Note: Thepumpcanautomaticallyrestartifthecommunicationcableisconnected.

Resetting the pump to factory defaults

TheIntelliFlo

®

VSpumpcanberesettothefactorydefaultsettings.Allpreviouslyadjustedpumpspeeds

thatweresavedwillbeerased.

Toresetthepumptothefactorydefaultsettings:

1. EnsurethatthepumpispoweredonandthegreenpowerLEDison.

2. PresstheStop buttontostopthepump.

3. PressandholdallofthefourSpeed buttonssimultaneouslyforthreeseconds.Poweroffthe

driveandreenergize.Thedefaultsettingswillbeineffect.

Control Panel Speed Buttons

English