10
T
he AV3 Input Jacks provide Both Component
and RGB Video Inputs at 1080i, for acces-
sories like a HD Receiver and Digital DVD
Players. Using the color difference signals (Pb,
Pr) and the luminance (Y) signal will improve
color bandwidth information. The TV can also
become a monitor for projectors, computers or
HD Receivers using the RGB Input.
1
Connect the Component (Y, Pb, Pr)
Video OUT jacks from the DVD player
(or similar device) to the (Y, Pb, Pr) AV3
IN(put) jacks on the TV.
2
Connect the red and white AUDIO
CABLES to the Audio (left and right)
output jacks on the rear of the accessory
device to the Audio (L and R) AV3
IN(put) jacks on the TV.
3
Connect a RGB cable from the VGA
OUT on the HD Receiver to the AV3
RGB Input jack on the back of the TV.
4
Connect a 75Ω round cable from the
OUT TO TV jack on the HD Receiver to
the 75Ω IN on the back of the TV.
5
If using a Satellite Dish, Cable signal or
Antenna signal, connect the 75Ω round
cable from a Satellite Dish to the SATEL-
LITE IN and/or the Cable and Antenna
signals to the ANTENNA “A” or “B” IN
on the back of the HD Receiver.
6
Press the SOURCE SELECT button
on the remote control to display the
SOURCE menu.
7
Press the CURSOR UP or DOWN
button to select the AV3 option.
8
Press the OK button to confirm your
selection. The TV will change to the
AV3 channel.
USING THE AV 3 I
NPUT JACKS
