Installation User manual-2934PT7333 7
Manual Store
‘ Sound Sys(tem): use the or
key to select the desired sound system;
Auto, BG, I, DK or M.
( Search: Press . The search starts.
Once a channel is found, the scanning
stops. Go to the next step.
If no picture is found, consult the possible
solutions (p.15)
§ Channel: enter the required channel
with the
, or digit keys.
Fine Tune: if the reception is not
satisfactory, adjust using the or
keys.
! Store: Press . The channel is stored.
ç Repeat steps “ to ‘ for each channel
you wish to store.
0To quit the menus, press .
This menu is used to store channels one at a
time.
& Press the
key.
é With the cursor, select the Install menu
and follow by the Manual.
“ Colour Sys(tem): use the or
key to select the desired colour system;
Auto, PAL, NTSC 3.58 or NTSC 4.43.
Sort
This feature allows you to rearrange channels
according to your preference.
& Press the
key. The Main menu is
displayed on the screen.
é With the cursor, select the Install menu
followed by the Sort menu.
“ Use the or key to select the
channel number you want to change
from (e.g. 001) and confirm selection with
the
key.
‘ Use the or key to select the
channel number you want to change to
(e.g. 004) and confirm selection with the
key.
The change is done. Channel 4 will move up to
channel 3 and channel 3 will move up to channel
2.
( Repeat steps “ and ‘ for each
channel you wish to change.
§ To quit the menus, press .
p4-8_2934PT7333.p65 06/29/04, 4:27 PM7
